Release: McXtrace 0.1
Rectangular/circular slit, duplicated
Author: Erik Knudsen
Origin: Risoe
Date: June 16, 2009
Based on Slit-comp by Kim Lefmann and Henrik Roennow A simple rectangular or circular slit. You may either specify the radius (circular shape), which takes precedence, or the rectangular bounds. The slits are separated with ’d’, and arranged along X. No transmission around the slit is allowed. If cutting option is used, low-weight x-rays are ABSORBED
Example: Slit_N(xwidth=0.01, yheight=0.01, d=0.02) Slit_N(radius=0.01, cut=1e-10, d=0.03)
Parameters in boldface are required; the others are optional.
|
Name |
Unit |
Description |
Default |
|
|
|||
|
radius |
m |
Radius of slit in the z=0 plane, centered at Origo |
0 |
|
cut |
|
Lower limit for allowed weight (1) |
0 |
|
xwidth |
m |
Width of slit. Overrides xmin,xmax. |
0 |
|
yheight |
m |
Height of slit. Overrides ymin,ymax. |
0 |
|
N |
1 |
Number of slit openings along X |
2 |
|
d |
m |
Separation of slits |
0 |
|
|
|||
|
|
|||
|
|
|||
Component source code found in file Slit_N.comp.
Documentation pending.