INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_MCPL_input.c
INFO: Using existing binary: ./Test_MCPL_input.out
INFO: ===
Warning (m5): user1=22 is unknown. The signal will not be resolved - this is likely not what you intended.
Using the input file: /Users/peterwillendrup/miniforge3/share/mcxtrace/resources/data/voutput.mcpl
[Test_MCPL_input] Initialize
Message(vin): MCPL file (/Users/peterwillendrup/miniforge3/share/mcxtrace/resources/data/voutput.mcpl) produced with McXtrace 1.5beta4 Test_MCPL_output.
Message(vin): MCPL file (/Users/peterwillendrup/miniforge3/share/mcxtrace/resources/data/voutput.mcpl) contains 1000 particles.


 Warning: You are using MCPL_input with a repeat_count of 1:
 - Minimum photon count requested is 1000 x 1 <= 1000 photons total

Initialize ncount is 1000
MCPL_input verbose mode - outputting data on the 10 first read photons in MCPL units:
id=1	pdg=22	ekin=0.010375 MeV	x=0.0403623 cm	y=-0.00340694 cm	z=0 cm	ux=0.000288476	uy=-0.000353901	uz=1	t=0.608283 ms	weight=7.95774e-11	polx=0	poly=0	polz=0
id=2	pdg=22	ekin=0.0101152 MeV	x=0.031369 cm	y=-0.00462988 cm	z=0 cm	ux=-0.000515111	uy=0.00041563	uz=1	t=0.178362 ms	weight=7.95774e-11	polx=0	poly=0	polz=0
id=3	pdg=22	ekin=0.0149879 MeV	x=0.0354626 cm	y=-0.00456058 cm	z=0 cm	ux=5.03005e-05	uy=-0.000351253	uz=1	t=0.131804 ms	weight=7.95774e-11	polx=0	poly=0	polz=0
id=4	pdg=22	ekin=0.0152832 MeV	x=-0.0202734 cm	y=-0.00376897 cm	z=0 cm	ux=0.000394904	uy=-0.000395561	uz=1	t=0.87208 ms	weight=7.95774e-11	polx=0	poly=0	polz=0
id=5	pdg=22	ekin=0.0115465 MeV	x=0.00290293 cm	y=0.00492102 cm	z=0 cm	ux=-0.000169173	uy=0.000302455	uz=1	t=0.945686 ms	weight=7.95775e-11	polx=0	poly=0	polz=0
id=6	pdg=22	ekin=0.0119863 MeV	x=-0.0173325 cm	y=-0.00122902 cm	z=0 cm	ux=0.000301816	uy=-0.000351179	uz=1	t=0.920338 ms	weight=7.95774e-11	polx=0	poly=0	polz=0
id=7	pdg=22	ekin=0.0127752 MeV	x=0.0189725 cm	y=-0.00296614 cm	z=0 cm	ux=1.2606e-05	uy=-0.000193266	uz=1	t=0.856135 ms	weight=7.95775e-11	polx=0	poly=0	polz=0
id=8	pdg=22	ekin=0.012869 MeV	x=-0.0344044 cm	y=0.00405676 cm	z=0 cm	ux=-8.40667e-05	uy=0.000241095	uz=1	t=0.642358 ms	weight=7.95775e-11	polx=0	poly=0	polz=0
id=9	pdg=22	ekin=0.0119534 MeV	x=-0.0162 cm	y=-0.00203548 cm	z=0 cm	ux=3.24515e-05	uy=-0.000167966	uz=1	t=0.220391 ms	weight=7.95775e-11	polx=0	poly=0	polz=0
id=10	pdg=22	ekin=0.0130148 MeV	x=0.0347051 cm	y=-0.00303287 cm	z=0 cm	ux=-0.000147218	uy=-1.77558e-05	uz=1	t=0.696843 ms	weight=7.95775e-11	polx=0	poly=0	polz=0
*** TRACE end *** 

Save [Test_MCPL_input]
Detector: m1_I=7.95774e-08 m1_ERR=2.51646e-09 m1_N=1000 "m1_1720867379.L"
Detector: m2_I=7.95774e-08 m2_ERR=2.51646e-09 m2_N=1000 "m2_1720867379.x_y"
Detector: m3_I=7.95774e-08 m3_ERR=2.51646e-09 m3_N=1000 "m3_1720867379.t"
Detector: m4_I=7.95774e-08 m4_ERR=2.51646e-09 m4_N=1000 "m4_1720867379.E"

Finally [Test_MCPL_input: 1]. Time: 0 [s] 
INFO: Placing instr file copy /Users/peterwillendrup/mcxtrace-test/20240713_1242_53/mcxtrace-3.4.54_Darwin/Test_MCPL_input/Test_MCPL_input.instr in dataset 1